Block Cylinder
Design:
Cylinder housing made of steel, hardened and blued. Piston and piston rod with internal thread, case-hardened and ground. Wiper at piston rod prevents from contamination.
Application:
Universal mounting to equipment using mounting holes. Universal element clamping, pressurising, riveting and punching.
Features:
Different strokes are available for each cylinder size. Every model is furnished with parallel and perpendicular mounting holes. Tapped piston rod ends allow the use of custom end attachments.
Note:
When placing into operation, ensure that all air is bled from the system. For applications above 100 bar operating pressure, the cylinders must be supported by the cross bores at the cylinder body when fastening. Screws of strength class 12.9 must be used for fastening.
VH = work stroke, RH = back stroke
| Order no. | 68171 |
|---|---|
| Max. clamping force [kN] | 10.1 |
| Max. operating pressure [bar] | 350 |
| Type of actuation | Double acting |
| Stroke [mm] | 19 |
Pimcore content from synoa_downloadsnk_downloads_tab_top
| Area | Language | File name | Type | File size |
|---|
Pimcore content from synoa_downloadsnk_downloads_tab_bottom
- Quick Disconnect Coupler Nr. 69021 Sleeve with external thread, max. operating pressure 1000 bar, nominal size 2,5
- High Pressure Hose with steel-wire interlace Nr. 68551 For thread connection, max. operating pressure 500 bar, length 300 mm
- Block Cylinder Nr. 68155 Max. operating pressure 350 bar, max. clamping force 10,1 kN, max. stroke 6,5 mm, double acting
- Block Cylinder Nr. 68023 Max. operating pressure 350 bar, max. clamping force 10,1 kN, max. stroke 6,5 mm, single acting
- Block Cylinder Nr. 68049 Max. operating pressure 350 bar, max. clamping force 10,1 kN, max. stroke 19 mm, single acting
